What is the thickness of the copper strip

Everyone knows that pure copper has very good conductivity, and is widely used in the manufacture of wires, cables, brushes, magnetic instruments and instruments for anti-magnetic interference, such as compasses, aviation instruments, etc.; copper strips are products with a relatively large application range at present. Purity, fine tissue, extremely low oxygen content.No porosity, excellent electrical conductivity, high surface precision of the mold produced by electro-etching, after heat treatment process, it has good thermal conductivity, processability, ductility, corrosion resistance and weather resistance, etc.Many people are not clear about the thickness of the copper strip. The following technicians will introduce it to you:

The thickness of the copper strip depends on where it is used. If the circuit board is generally 2MM, it also depends on whether there is a fan for heat dissipation, including the position of the fan. The principle is that the thinner the better, (the premise is that it can conduct heat conduction, in other words, You take a copper wire and burn one end red, and you can touch the other end with your hands. You take a copper block and burn one end red. Thick heat conducts quickly, and thin heat conducts slowly. But thick heat dissipates slowly, and thin heat quickly. , so you have to look at where it is used, the heat generated by the heat source, and the safe temperature required by the heat source.

Copper strip material: T1, T2, T3, C1100, TU1, TU2, TP1, TP2, TAg0.08, TAg0.1, C1100, C1011, C1020, C1201, C1220, C11000, etc.

Copper strip specifications: thickness: 0.1-3.0mm; width: 30-1000mm.

Copper strip hardness: O, 1/2H, 1/4H, 3/4H, H, EH, SH, etc.

Copper strips are generally divided into thin and medium thickness, the thin thickness is 0.1mm-3.0mm, the medium thickness is 3.0mm-200mm, and the thin 0.1mm-0.5mm can usually be produced to a maximum width of 600mm, and the thickness is ≥0.5mm. —The maximum width of the 3.0mm board is 1000mm, the thickness of the board above 3mm can be produced to more than 1000mm, and the maximum width of the board can be produced to 3500mm.

What is the thickness of the copper strip? I will share this today. We need to know its weight after knowing the thickness. The formula for calculating the theoretical weight of the copper strip: copper strip weight (kg)=thickness (mm)×width (mm)×length (m)× 0.0089, the width and thickness in the theoretical weight calculation formula of the copper strip are in millimeters (mm), and the length is in meters (m), so the theoretical weight unit of the copper strip is kilograms.